Your source for military surplus.

Bolt Body Bent 91/30 PU Sniper Mosin Nagant Rifle


My Fabricator usually delivers me this item on Friday afternoons. I add the quantity to the site at that time. They are usually gone by Sunday.

These are made to the same specifications as the original Sniper Bolt Bodies for the 91/30 PU snipers. These original bolt bodies have had the handle turned down as well as extended to the proper length. There are cheaper ones out there...beware of the Numrich Arms bolt bodies that are turned down, but not extended and are useless with the PU scopes.

These are the BEST Out There!!! My fabricator is very the point of being ridiculous. There may be some out there cheaper, but none better. You will not be disappointed.


Changing Out this part should not affect head space as the bolt head lugs are what locks into the receiver and determines head spacing. As with all surplus rifles, you should have the head space checked before initially shooting them.

If you are interested in retaining your existing serial numbers, we can modify your bolt body retaining most markings.

Our Bolt handles are fabricated from bar steel ( Not Stainless or Mild Steel) on state of the art CNC equipment. These are then welded (NOT Silver Soldered or Thread Locked as some fabricators are doing). The weld is then ground down and smoothed, then the bolt body is polished.

We believe these to be the best available anywhere. These are as close to the original PU sniper specs as you can get.


There are Three common ways of installing a scope on the Mosin Nagant Rifles.

1. Original PU Mount, This is the preferred way, but at this time, the original mounts and scopes are expensive and require that the receiver be drilled and tapped as well as inletting the wood stock. These also require a turned down and extended bolt handle which will clear the mount. The bolt handle I sell for this is built to original specifications. Part (P-MN-6A)

2. ATI Mount Kit Part# (P-MN-64), This kit comes with everything you need to mount a weaver base to the rifle including a bolt handle. This requires the receiver to be drilled and tapped as well as sawing off the original bolt handle, drilling and tapping the bolt body and installing the new handle. This works, but most people find the bolt modification distasteful. The weaver base on this sits lower the the PU mount. The standard PU bolt body will not work with this mount. I have a bolt handle which works with this system. Part (P-MN-6B).

3. Scout Mount PART# (P-MN-54), This is the least desireable but easiest way to mount a scope on the Mosin Nagant Rifles. This mount replaces the rear sight leaf and does not require any permanent modifications, drilling or tapping of the receiver. The scope however sits much farther from the shooter and requires a scope with a long eye relief PART# (P-MN-57) or (P-MN-56). A modified bolt handle is not necessary with this option. I do sell several bolt bodies which can be used to sporterize this type of installation. (P-MN-6D, MN-6E or MN-6F)

Sold Out
  • Model: P-MN-6A
  • Shipping Weight: 1lbs
  • 0 Units in Stock

This product was added to our catalog on Friday 07 April, 2006.

Your IP Address is:
Copyright © 2018 Online Store. Powered by Zen Cart
Parse Time: 0.579 - Number of Queries: 329 - Query Time: 0.260829066986